MK01 nRF52832 Bluetooth Module is a powerful, highly flexible and ultra-low power Bluetooth® 5 modules based on Nordic® Semiconductor higher-end nRF52832 SoC solution, which has a 32-bit Arm® Cortex™-M4 CPU with floating-point unit running at 64 MHz. MK01 has an ultra-small size of 10mm x 10mm.
MK01 series is a powerful, highly flexible and ultra-low power Bluetooth® 5 modules based on Nordic® Semiconductor higher-end nRF52832 SoC solution, which has a 32-bit Arm® Cortex™-M4 CPU with the floating-point unit running at 64 MHz. MK01 has an ultra-small size of 10mm x 10mm.
MK01A integrates a high-performance ceramic chip antenna
MK01B uses a u.FL connector and requires an external antenna
Bluetooth® Low Energy
Bluetooth® Mesh
1M LE PHY
2M LE PHY
Advertising Extensions
CSA #2
Concurrent central, observer, peripheral, and broadcaster roles with up to twenty concurrent connections along with one observer and one broadcaster
GFSK at 1 Mbps/ 2 Mbps data rates
MK01A – Ceramic chip, Peak Gain: 0.9dBi, Efficiency: -1.8dB (66%)
MK01B – Peak Gain: 3dBi, Efficiency: 85% (2.4GHz 3dBi Terminal Mount Dipole Antenna)
-96 dBm in 1 Mbps Bluetooth® low energy mode
-89 dBm in 2 Mbps Bluetooth® low energy mode
-93 dBm in 1 Mbps ANT mode
-30 dBm in whisper mode
Length: 10mm±0.2mm
Width: 10mm±0.2mm
Height: 2.0mm+0.1mm/-0.15mm
36 LGA (Land Grid Array) pads
ARM® Cortex®-M4 32-bit processor with FPU, 64MHz
512 kB flash, 64 kB RAM
3x SPI master/slave with EasyDMA
2x I2 C compatible 2-wire master/slave
22 GPIOs
7x 12bit, 200ksps ADC
3x real-time counter (RTC)
3x 4-channel pulse width modulator (PWM) unit with EasyDMA
UART (CTS/RTS) with EasyDMA
I 2 S with EasyDMA
Digital microphone interface (PDM)
Quadrature decoder (QDEC)
NFC-A Tag
1.7V to 3.6V
-40 to 85°C
Internal 32.768 kHz +/-250 ppm RC oscillator
Internal LDO regulator setup
| Item | Description | Version | Size | Last Update |
|---|---|---|---|---|
| Datasheet | MK01_Bluetooth_Module_Datasheet.pdf | 1.1 | 985KB | 06/08/2020 |
